The English version of quarkus.io is the official project site. Translated sites are community supported on a best-effort basis.
返回指南目录

gRPC code generation reference guide

This reference guide explains how to configure gRPC code generation. It is recommended to read the official gRPC guide first.

Enabling gRPC code generation

By default, \*.proto files located in the src/main/proto directory are compiled into Java sources during the build process.

Using Maven

To enable gRPC code generation, add the following dependency to your project:

<dependency>
  <groupId>io.quarkus</groupId>
  <artifactId>quarkus-grpc</artifactId>
</dependency>

Next, ensure that the generate-code phase is enabled in the Quarkus Maven plugin:

<plugin>
    <groupId>${quarkus.platform.group-id}</groupId>
    <artifactId>quarkus-maven-plugin</artifactId>
    <version>${quarkus.platform.version}</version>
    <extensions>true</extensions>
    <executions>
        <execution>
            <goals>
                <goal>build</goal>
                <goal>generate-code</goal>
                <goal>generate-code-tests</goal>
            </goals>
        </execution>
    </executions>
</plugin>

Using Gradle

For Gradle, add the following dependency to your project:

implementation 'io.quarkus:quarkus-grpc'

Customizing the proto directory

By default, it is assumed that the \*.proto files are located in the src/main/proto directory. You can configure this location using the quarkus.grpc.codegen.proto-directory property in your build descriptor.

With Maven, add the following configuration:

<plugin>
    <groupId>${quarkus.platform.group-id}</groupId>
    <artifactId>quarkus-maven-plugin</artifactId>
    <version>${quarkus.platform.version}</version>
    <extensions>true</extensions>
    <executions>
        <execution>
            <goals>
                <goal>build</goal>
                <goal>generate-code</goal>
                <goal>generate-code-tests</goal>
            </goals>
            <configuration>
                <properties>
                    <quarkus.grpc.codegen.proto-directory>${project.basedir}/ext/proto</quarkus.grpc.codegen.proto-directory>
                </properties>
            </configuration>
        </execution>
    </executions>
</plugin>

With Gradle, use the following configuration:

quarkus {
    quarkusBuildProperties.put("quarkus.grpc.codegen.proto-directory", "${project.projectDir}/ext/proto")
}

Generating Descriptor Set

Protocol Buffers do not contain descriptions of their own types. Thus, given only a raw message without the corresponding .proto file defining its type, it is difficult to extract any useful data. However, the contents of a .proto file can itself be represented using protocol buffers.

By default, Quarkus does not generate these descriptors. Quarkus does provide several configuration options for generating them. These would be added to your application.properties or application.yml file:

  • quarkus.generate-code.grpc.descriptor-set.generate

    • Set to true to enable generation

  • quarkus.generate-code.grpc.descriptor-set.output-dir

    • Set this to a value relative to the project’s build directory (i.e. target for Maven, build for Gradle)

    • Maven default value: target/generated-sources/grpc

    • Gradle default value: $buildDir/classes/java/quarkus-generated-sources/grpc

  • quarkus.generate-code.grpc.descriptor-set.name

    • Name of the descriptor set file to generate

    • Default value: descriptor_set.dsc

Configuring gRPC code generation for dependencies

You may have dependencies that contain *.proto files you want to compile to Java sources. This section explains how to configure code generation to include these \*.proto files during code generation.

Proto files for imports

The Protocol Buffers specification provides a way to import proto files. The Quarkus code generation mechanism lets you control the scope of dependencies to scan for possible imports by setting the quarkus.generate-code.grpc.scan-for-imports property in your application.properties. You can set it to one of the following values:

  • all - scan all dependencies

  • none - don’t scan dependencies, use only what is defined in src/main/proto or src/test/proto

  • groupId1:artifactId1,groupId2:artifactId2 - scan only the specified dependencies by group ID and artifact ID.

If not specified, the property defaults to com.google.protobuf:protobuf-java. To override it, set the quarkus.generate-code.grpc.scan-for-imports property in your application.properties. For example:

quarkus.generate-code.grpc.scan-for-imports=all

Proto files from dependencies

In some cases, you may want to use proto files from a different project to generate gRPC stubs. To do this:

  1. Add a dependency on the artifact that contains the proto file to your project.

  2. In application.properties, specify the dependencies you want to scan for proto files.

quarkus.generate-code.grpc.scan-for-proto=<groupId>:<artifactId>

The value of the property can be none, which is the default, or a comma-separated list of groupId:artifactId coordinates.

If the dependency contains many proto files, and you want to generate classes for only a subset of them, you can specify glob patterns per dependency. The paths to match are relative to the src/main/resources path in the dependency. For example:

quarkus.generate-code.grpc.scan-for-proto-include."<groupId>:<artifactId>"=foo/**,bar/**,banana/a-proto.proto
quarkus.generate-code.grpc.scan-for-proto-exclude."<groupId>:<artifactId>"=foo/private/**,bar/another-proto.proto

Note that : characters in the property keys must be escaped.

Skipping code generation

You can skip gRPC code generation using:

  1. The grpc.codegen.skip system property: -Dgrpc.codegen.skip=true

  2. The quarkus.grpc.codegen.skip property in your application.properties file: quarkus.grpc.codegen.skip=true

Generating Java files from proto with the protobuf-maven-plugin

Alternatively, to generate stubs for proto files, you can use the protobuf-maven-plugin. However, it’s recommended to use Quarkus support unless you have a specific need.

To do this, define the following properties in the <properties> section:

<grpc.version>1.65.1</grpc.version>
<protoc.version>3.25.5</protoc.version>

These properties configure the gRPC version and the protoc version.

Then, add the os-maven-plugin extension and the protobuf-maven-plugin configuration to the build section:

<build>
    <extensions>
        <extension>
            <groupId>kr.motd.maven</groupId>
            <artifactId>os-maven-plugin</artifactId>
            <version>${os-maven-plugin-version}</version>
        </extension>
    </extensions>

    <plugins>
        <plugin>
            <groupId>org.xolstice.maven.plugins</groupId>
            <artifactId>protobuf-maven-plugin</artifactId>   (1)
            <version>${protobuf-maven-plugin-version}</version>
            <configuration>
                <protocArtifact>com.google.protobuf:protoc:${protoc.version}:exe:${os.detected.classifier}</protocArtifact>  (2)
                <pluginId>grpc-java</pluginId>
                <pluginArtifact>io.grpc:protoc-gen-grpc-java:${grpc.version}:exe:${os.detected.classifier}</pluginArtifact>
                <protocPlugins>
                    <protocPlugin>
                        <id>quarkus-grpc-protoc-plugin</id>
                        <groupId>io.quarkus</groupId>
                        <artifactId>quarkus-grpc-protoc-plugin</artifactId>
                        <version>{quarkus-version}</version>
                        <mainClass>io.quarkus.grpc.protoc.plugin.MutinyGrpcGenerator</mainClass>
                    </protocPlugin>
                </protocPlugins>
            </configuration>
            <executions>
                <execution>
                    <id>compile</id>
                    <goals>
                        <goal>compile</goal>
                        <goal>compile-custom</goal>
                    </goals>
                </execution>
                <execution>
                    <id>test-compile</id>
                    <goals>
                        <goal>test-compile</goal>
                        <goal>test-compile-custom</goal>
                    </goals>
                </execution>
            </executions>
        </plugin>

        <!-- ... -->
    </plugins>
</build>
1 The protobuf-maven-plugin generates stub classes from your gRPC service definition (proto files).
2 Class generation uses the tool protoc, which is OS-specific. This is why we use the os-maven-plugin to target the executable compatible with the operating system.

Note: This configuration instructs the protobuf-maven-plugin to generate default gRPC classes and classes using Mutiny to fit with the Quarkus development experience.

When using protobuf-maven-plugin, instead of the quarkus-maven-plugin, you need to re-generate classes (using mvn compile) every time you update the proto files.

Using generated gRPC classes from dependencies

When gRPC classes, which are classes generated from proto files, are in a dependency of the application, the dependency needs a Jandex index. You can create a Jandex index using the jandex-maven-plugin. More information on this topic can be found in the Bean Discovery section of the CDI guide.

<build>
    <plugins>
        <plugin>
            <groupId>io.smallrye</groupId>
            <artifactId>jandex-maven-plugin</artifactId>
            <version>3.2.3</version>
            <executions>
                <execution>
                <id>make-index</id>
                <goals>
                    <goal>jandex</goal>
                </goals>
                </execution>
            </executions>
        </plugin>
    </plugins>
</build>

If you are using Gradle, you can use the following configuration:

plugins {
    id 'org.kordamp.gradle.jandex' version '1.1.0'
}
It is recommended to package the proto files in a dependency instead of the generated classes, so Quarkus can generate optimized classes. Refer to the dedicated section for more information.

Argument files

When the protoc command line exceeds the maximum command length, you can ask Quarkus to use an argument file to pass the arguments to the protoc command.

To enable this feature, set the quarkus.generate-code.grpc.use-arg-file property in your application.properties file to true.

If you are on Windows, and the command line exceeds 8190 characters, Quarkus automatically uses an argument file to pass the arguments to the protoc command.

Related content

On the same extensions

On the same topics

Quarkus is open. All dependencies of this project are available under the Apache Software License 2.0 or compatible license.

This website was built with Jekyll, is hosted on GitHub Pages and is completely open source. If you want to make it better, fork the website and show us what you’ve got.

Navigation
Follow Us
Get Help
Languages
Quarkus is made of community projects
CC by 3.0 | Privacy Policy Sponsored by